D-Link DI-704 Internet Gateway firmware earlier than V2.56b6 allows remote attackers to cause a denial of service (reboot) via malformed IP datagram fragments.

D-Link DWL-1000AP Firmware 3.2.28 #483 Wireless LAN Access Point stores the administrative password in plaintext in the default Management Information Base (MIB), which allows remote attackers to gain administrative privileges.

D-Link DWL-1000AP Firmware 3.2.28 #483 Wireless LAN Access Point uses a default SNMP community string of 'public' which allows remote attackers to gain sensitive information.

The web server for D-Link DP-300 print server allows remote attackers to cause a denial of service (hang) via a large HTTP POST request.

The remote administration capability for the D-Link DI-804 router 4.68 allows remote attackers to bypass authentication and release DHCP addresses or obtain sensitive information via a direct web request to the pages (1) release.htm, (2) Device Status, or (3) Device Information.

Buffer overflow in the Embedded HTTP server, as used in (1) D-Link DI-804 4.68, Dl-704 V2.56b6, and Dl-704 V2.56b5 and (2) Linksys Etherfast BEFW11S4 Wireless AP + Cable/DSL Router 1.37.2 through 1.42.7 and Linksys WAP11 1.3 and 1.4, allows remote attackers to cause a denial of service (crash) via a long header, as demonstrated using the Host header.

GlobalSunTech Wireless Access Points (1) WISECOM GL2422AP-0T, and possibly OEM products such as (2) D-Link DWL-900AP+ B1 2.1 and 2.2, (3) ALLOY GL-2422AP-S, (4) EUSSO GL2422-AP, and (5) LINKSYS WAP11-V2.2, allow remote attackers to obtain sensitive information like WEP keys, the administrator password, and the MAC filter via a "getsearch" request to UDP port 27155.

TFTP server in Longshine Wireless Access Point (WAP) LCS-883R-AC-B, and in D-Link DI-614+ 2.0 which is based on it, allows remote attackers to obtain the WEP secret and gain administrator privileges by downloading the configuration file (config.img) and other files without authentication.

D-Link wireless access point DWL-900AP+ 2.2, 2.3 and possibly 2.5 allows remote attackers to set factory default settings by upgrading the firmware using AirPlus Access Point Manager.

Cross-site scripting (XSS) vulnerability in D-Link DI-614+ SOHO router running firmware 2.30, and DI-704 SOHO router running firmware 2.60B2, and DI-624, allows remote attackers to inject arbitrary script or HTML via the DHCP HOSTNAME option in a DHCP request.

Integer signedness error in D-Link AirPlus DI-614+ running firmware 2.30 and earlier allows remote attackers to cause a denial of service (IP lease depletion) via a DHCP request with the LEASETIME option set to -1, which makes the DHCP lease valid for thirteen or more years.

D-Link DCS-900 Internet Camera listens on UDP port 62976 for an IP address, which allows remote attackers to change the IP address of the camera via a UDP broadcast packet.

D-Link DSL-502T, DSL-504T, DSL-562T, and DSL-G604T, when /cgi-bin/firmwarecfg is executed, allows remote attackers to bypass authentication (1) if their IP address already exists in /var/tmp/fw_ip or (2) if their request is the first, which causes /var/tmp/fw_ip to be created and contain their IP address.

D-Link DI-524 Wireless Router, DI-624 Wireless Router, and DI-784 allow remote attackers to cause a denial of service (device reboot) via a series of crafted fragmented UDP packets, possibly involving a missing fragment.

D-Link DWL-G700AP with firmware 2.00 and 2.01 allows remote attackers to cause a denial of service (CAMEO HTTP service crash) via a request composed of "GET" followed by a space and two newlines, possibly triggering the crash due to missing arguments.

Directory traversal vulnerability in webcm in the D-Link DSL-G604T Wireless ADSL Router Modem allows remote attackers to read arbitrary files via an absolute path in the getpage parameter.

Cross-site scripting (XSS) vulnerability in login_error.shtml for D-Link DSA-3100 allows remote attackers to inject arbitrary HTML or web script via an encoded uname parameter.

The web server for D-Link Wireless Access-Point (DWL-2100ap) firmware 2.10na and earlier allows remote attackers to obtain sensitive system information via a request to an arbitrary .cfg file, which returns configuration information including passwords.

Stack-based buffer overflow in the Universal Plug and Play (UPnP) service in D-Link DI-524, DI-604 Broadband Router, DI-624, D-Link DI-784, WBR-1310 Wireless G Router, WBR-2310 RangeBooster G Router, and EBR-2310 Ethernet Broadband Router allows remote attackers to execute arbitrary code via a long M-SEARCH request to UDP port 1900.

The D-Link DPH-540/DPH-541 phone accepts SIP INVITE messages that are not from the Call Server's IP address, which allows remote attackers to engage in arbitrary SIP communication with the phone, as demonstrated by communication with forged caller ID.

The D-Link DPH-540/DPH-541 phone allows remote attackers to cause a denial of service (device outage) via a malformed SDP header in a SIP INVITE message.

Cross-site scripting (XSS) vulnerability in auth.asp on the D-LINK DKVM-IP8 with firmware 2282_dlinkA4_p8_20071213 allows remote attackers to inject arbitrary web script or HTML via the nickname parameter.

Cross-site scripting (XSS) vulnerability in the Ping tools web interface in Dlink Di-604 router allows remote attackers to inject arbitrary web script or HTML via the IP field.

The Ping tools web interface in Dlink Di-604 router allows remote authenticated users to cause a denial of service via a large "ip textfield" size.

Multiple cross-site request forgery (CSRF) vulnerabilities in the D-Link DSL-6740U gateway (Rev. H1) allow remote attackers to hijack the authentication of administrators for requests that change administrator credentials or enable remote management services to (1) Custom Services in Port Forwarding, (2) Port Triggering Entries, (3) URL Filters in Parental Control, (4) Print Server settings, (5) QoS Queue Setup, or (6) QoS Classification Entries.

Cross-site request forgery (CSRF) vulnerability in D-Link DAP-2253 Access Point (Rev. A1) with firmware before 1.30 allows remote attackers to hijack the authentication of administrators for requests that modify configuration settings via unspecified vectors.

Cross-site scripting (XSS) vulnerability in D-Link DAP-2253 Access Point (Rev. A1) with firmware before 1.30 allows remote attackers to inject arbitrary web script or HTML via unspecified vectors.

D-Link DNS-320L firmware before 1.04b12, DNS-327L before 1.03b04 Build0119, DNR-326 1.40b03, DNS-320B 1.02b01, DNS-345 1.03b06, DNS-325 1.05b03, and DNS-322L 2.00b07 allow remote attackers to bypass authentication and log in with administrator permissions by passing the cgi_set_wto command in the cmd parameter, and setting the spawned session's cookie to username=admin.

The check_login function in D-Link DNR-326 before 2.10 build 03 allows remote attackers to bypass authentication and log in by setting the username cookie parameter to an arbitrary string.

Stack-based buffer overflow in login_mgr.cgi in D-Link firmware DNR-320L and DNS-320LW before 1.04b08, DNR-322L before 2.10 build 03, DNR-326 before 2.10 build 03, and DNS-327L before 1.04b01 allows remote attackers to execute arbitrary code by crafting malformed "Host" and "Referer" header values.

The web/web_file/fb_publish.php script in D-Link DNS-320L before 1.04b12 and DNS-327L before 1.03b04 Build0119 does not authenticate requests, which allows remote attackers to obtain arbitrary photos and publish them to an arbitrary Facebook profile via a target album_id and access_token.

Directory traversal vulnerability in cgi-bin/sddownload.cgi in D-link IP camera DCS-2103 with firmware 1.0.0 allows remote attackers to read arbitrary files via a .. (dot dot) in the file parameter.

D-link IP camera DCS-2103 with firmware 1.0.0 allows remote attackers to obtain the installation path via the file parameter to cgi-bin/sddownload.cgi, as demonstrated by a / (forward slash) character.

Cross-site scripting (XSS) vulnerability in login.cgi in D-Link router DIR-655 (rev Bx) with firmware before 2.12b01 allows remote attackers to inject arbitrary web script or HTML via the html_response_page parameter.

The ping tool in multiple D-Link and TRENDnet devices allow remote attackers to execute arbitrary code via the ping_addr parameter to ping.ccp.

Directory traversal vulnerability in D-Link DVG-N5402SP with firmware W1000CN-00, W1000CN-03, or W2000EN-00 allows remote attackers to read sensitive information via a .. (dot dot) in the errorpage parameter.

D-Link DVG-N5402SP with firmware W1000CN-00, W1000CN-03, or W2000EN-00 has a default password of root for the root account and tw for the tw account, which makes it easier for remote attackers to obtain administrative access.

D-Link DVG-N5402SP with firmware W1000CN-00, W1000CN-03, or W2000EN-00 discloses usernames, passwords, keys, values, and web account hashes (super and admin) in plaintext when running a configuration backup, which allows remote attackers to obtain sensitive information.

Session fixation vulnerability in D-Link DIR-600L routers (rev. Ax) with firmware before FW1.17.B01 allows remote attackers to hijack web sessions via unspecified vectors.

D-Link DAP-1353 H/W vers. B1 3.15 and earlier, D-Link DAP-2553 H/W ver. A1 1.31 and earlier, and D-Link DAP-3520 H/W ver. A1 1.16 and earlier reveal wireless passwords and administrative usernames and passwords over SNMP.

Stack-based buffer overflow in dws/api/Login on D-Link DIR-850L B1 2.07 before 2.07WWB05, DIR-817 Ax, DIR-818LW Bx before 2.05b03beta03, DIR-822 C1 3.01 before 3.01WWb02, DIR-823 A1 1.00 before 1.00WWb05, DIR-895L A1 1.11 before 1.11WWb04, DIR-890L A1 1.09 before 1.09b14, DIR-885L A1 1.11 before 1.11WWb07, DIR-880L A1 1.07 before 1.07WWb08, DIR-868L B1 2.03 before 2.03WWb01, and DIR-868L C1 3.00 before 3.00WWb01 devices allows remote attackers to execute arbitrary code via a long session cookie.

On D-Link DIR-600M devices before C1_v3.05ENB01_beta_20170306, XSS was found in the form2userconfig.cgi username parameter.

D-Link DIR-600 Rev Bx devices with v2.x firmware allow remote attackers to read passwords via a model/__show_info.php?REQUIRE_FILE= absolute path traversal attack, as demonstrated by discovering the admin password.

D-Link DIR-850L REV. A (with firmware through FW114WWb07_h2ab_beta1) devices have XSS in the action parameter to htdocs/web/wpsacts.php.

D-Link DIR-850L REV. A (with firmware through FW114WWb07_h2ab_beta1) devices have XSS in the action parameter to htdocs/web/shareport.php.

D-Link DIR-850L REV. A (with firmware through FW114WWb07_h2ab_beta1) devices have XSS in the action parameter to htdocs/web/sitesurvey.php.

D-Link DIR-850L REV. A (with firmware through FW114WWb07_h2ab_beta1) devices have XSS in the action parameter to htdocs/web/wandetect.php.

register_send.php on D-Link DIR-850L REV. B (with firmware through FW208WWb02) devices does not require authentication, which can result in unintended enrollment in mydlink Cloud Services.

The D-Link NPAPI extension, as used in conjunction with D-Link DIR-850L REV. B (with firmware through FW208WWb02) devices, sends the cleartext admin password over the Internet as part of interaction with mydlink Cloud Services.

The D-Link NPAPI extension, as used on D-Link DIR-850L REV. A (with firmware through FW114WWb07_h2ab_beta1) and REV. B (with firmware through FW208WWb02) devices, participates in mydlink Cloud Services by establishing a TCP relay service for HTTP, even though a TCP relay service for HTTPS is also established.

The D-Link NPAPI extension, as used on D-Link DIR-850L REV. A (with firmware through FW114WWb07_h2ab_beta1) and REV. B (with firmware through FW208WWb02) devices, does not verify X.509 certificates from SSL servers, which allows man-in-the-middle attackers to spoof servers and obtain sensitive information via a crafted certificate.

D-Link DIR-850L REV. B (with firmware through FW208WWb02) devices have a hardcoded password of wrgac25_dlink.2013gui_dir850l for the Alphanetworks account upon device reset, which allows remote attackers to obtain root access via a TELNET session.

D-Link DIR-850L REV. A (with firmware through FW114WWb07_h2ab_beta1) and REV. B (with firmware through FW208WWb02) devices use the same hardcoded /etc/stunnel.key private key across different customers' installations, which allows remote attackers to defeat the HTTPS cryptographic protection mechanisms by leveraging knowledge of this key from another installation.

htdocs/parentalcontrols/bind.php on D-Link DIR-850L REV. A (with firmware through FW114WWb07_h2ab_beta1) devices does not prevent unauthenticated nonce-guessing attacks, which makes it easier for remote attackers to change the DNS configuration via a series of requests.

D-Link DIR-850L REV. A (with firmware through FW114WWb07_h2ab_beta1) and REV. B (with firmware through FW208WWb02) devices have 0666 /var/passwd permissions.

D-Link DIR-850L REV. A (with firmware through FW114WWb07_h2ab_beta1) and REV. B (with firmware through FW208WWb02) devices have 0666 /var/etc/hnapasswd permissions.

D-Link DIR-850L REV. A (with firmware through FW114WWb07_h2ab_beta1) and REV. B (with firmware through FW208WWb02) devices have 0644 /var/etc/shadow (aka the /etc/shadow symlink target) permissions.

D-Link DIR-850L REV. A (with firmware through FW114WWb07_h2ab_beta1) and REV. B (with firmware through FW208WWb02) devices have 0666 /var/run/storage_account_root permissions.

D-Link DIR-850L REV. A (with firmware through FW114WWb07_h2ab_beta1) and REV. B (with firmware through FW208WWb02) devices have 0666 /var/run/hostapd* permissions.

The DHCP client on D-Link DIR-850L REV. A (with firmware through FW114WWb07_h2ab_beta1) and REV. B (with firmware through FW208WWb02) devices allows unauthenticated remote code execution as root because /etc/services/INET/inet_ipv4.php mishandles shell metacharacters, affecting generated files such as WAN-1-udhcpc.sh.

D-Link DIR-850L REV. A (with firmware through FW114WWb07_h2ab_beta1) and REV. B (with firmware through FW208WWb02) devices allow remote attackers to cause a denial of service (daemon crash) via crafted LAN traffic.

D-Link DIR-130 firmware version 1.23 and DIR-330 firmware version 1.12 are vulnerable to authentication bypass of the remote login page. A remote attacker that can access the remote management login page can manipulate the POST request in such a manner as to access some administrator-only pages such as tools_admin.asp without credentials.

D-Link DIR-130 firmware version 1.23 and DIR-330 firmware version 1.12 do not sufficiently protect administrator credentials. The tools_admin.asp page discloses the administrator password in base64 encoding in the returned web page. A remote attacker with access to this page (potentially through a authentication bypass such as CVE-2017-3191) may obtain administrator credentials for the device.

Multiple D-Link devices including the DIR-850L firmware versions 1.14B07 and 2.07.B05 contain a stack-based buffer overflow vulnerability in the web administration interface HNAP service.

Multiple cross-site request forgery (CSRF) vulnerabilities on the D-Link DI-524 Wireless Router with firmware 9.01 allow remote attackers to (1) change the admin password, (2) reboot the device, or (3) possibly have unspecified other impact via crafted requests to CGI programs.

CSRF exists on D-Link DIR-600M Rev. Cx devices before v3.05ENB01_beta_20170306. This can be used to bypass authentication and insert XSS sequences or possibly have unspecified other impact.

D-Link DIR-615 HW: T1 FW:20.09 is vulnerable to Cross-Site Request Forgery (CSRF) vulnerability. This enables an attacker to perform an unwanted action on a wireless router for which the user/admin is currently authenticated, as demonstrated by changing the Security option from WPA2 to None, or changing the hiddenSSID parameter, SSID parameter, or a security-option password.

D-Link DCS-936L devices with firmware before 1.05.07 have an inadequate CSRF protection mechanism that requires the device's IP address to be a substring of the HTTP Referer header.

D-Link DIR-615 Wireless N 300 Router allows authentication bypass via a modified POST request to login.cgi. This issue occurs because it fails to validate the password field. Successful exploitation of this issue allows an attacker to take control of the affected device.

D-Link DIR-615 T1 devices allow XSS via the Add User feature.

D-Link DIR-615 2.5.17 devices allow Remote Code Execution via shell metacharacters in the Host field of the System / Traceroute screen.

An issue was discovered on D-Link DSL-3782 EU 1.01 devices. An authenticated user can pass a long buffer as a 'read' parameter to the '/userfs/bin/tcapi' binary (in the Diagnostics component) using the 'read <node_name>' function and cause memory corruption. Furthermore, it is possible to redirect the flow of the program and execute arbitrary code.

An issue was discovered on D-Link DSL-3782 EU 1.01 devices. An authenticated user can pass a long buffer as a 'get' parameter to the '/userfs/bin/tcapi' binary (in the Diagnostics component) using the 'get <node_name attr>' function and cause memory corruption. Furthermore, it is possible to redirect the flow of the program and execute arbitrary code.

An issue was discovered on D-Link DSL-3782 EU 1.01 devices. An authenticated user can pass a long buffer as an 'unset' parameter to the '/userfs/bin/tcapi' binary (in the Diagnostics component) using the 'unset <node_name>' function and cause memory corruption. Furthermore, it is possible to redirect the flow of the program and execute arbitrary code.

An issue was discovered on D-Link DSL-3782 EU 1.01 devices. An authenticated user can pass a long buffer as a 'show' parameter to the '/userfs/bin/tcapi' binary (in the Diagnostics component) using the 'show <node_name>' function and cause memory corruption. Furthermore, it is possible to redirect the flow of the program and execute arbitrary code.

An issue was discovered on D-Link DSL-3782 EU 1.01 devices. An authenticated user can pass a long buffer as a 'commit' parameter to the '/userfs/bin/tcapi' binary (in the Diagnostics component) using the 'commit <node_name>' function and cause memory corruption. Furthermore, it is possible to redirect the flow of the program and execute arbitrary code.

An issue was discovered on D-Link DSL-3782 EU 1.01 devices. An authenticated user can pass a long buffer as a 'staticGet' parameter to the '/userfs/bin/tcapi' binary (in the Diagnostics component) using the 'staticGet <node_name attr>' function and cause memory corruption. Furthermore, it is possible to redirect the flow of the program and execute arbitrary code.

On D-Link DIR-550A and DIR-604M devices through v2.10KR, a malicious user can forge an HTTP request to inject operating system commands that can be executed on the device with higher privileges, aka remote code execution.

On D-Link DIR-550A and DIR-604M devices through v2.10KR, a malicious user can use a default TELNET account to get unauthorized access to vulnerable devices, aka a backdoor access vulnerability.

The weblogin_log function in /htdocs/cgibin on D-Link DIR-629-B1 devices allows attackers to execute arbitrary code or cause a denial of service (buffer overflow) via a session.cgi?ACTION=logout request involving a long REMOTE_ADDR environment variable.

Stack-based buffer overflow in the websRedirect function in GoAhead on D-Link DIR-816 A2 (CN) routers with firmware version 1.10B05 allows unauthenticated remote attackers to execute arbitrary code via a request with a long HTTP Host header.

An issue was discovered on D-Link DIR-890L with firmware 1.21B02beta01 and earlier, DIR-885L/R with firmware 1.21B03beta01 and earlier, and DIR-895L/R with firmware 1.21B04beta04 and earlier devices (all hardware revisions). Due to the predictability of the /docs/captcha_(number).jpeg URI, being local to the network, but unauthenticated to the administrator's panel, an attacker can disclose the CAPTCHAs used by the access point and can elect to load the CAPTCHA of their choosing, leading to unauthorized login attempts to the access point.

An issue was discovered on D-Link DIR-809 A1 through 1.09, A2 through 1.11, and Guest Zone through 1.09 devices. One can bypass authentication mechanisms to download the configuration file.

An issue was discovered on D-Link DIR-809 A1 through 1.09, A2 through 1.11, and Guest Zone through 1.09 devices. Device passwords, such as the admin password and the WPA key, are stored in cleartext.

D-Link DIR-846 devices with firmware 100.26 allow remote attackers to execute arbitrary code as root via a SetNetworkTomographySettings request by leveraging admin access.

On D-Link DIR-823G devices, ExportSettings.sh, upload_settings.cgi, GetDownLoadSyslog.sh, and upload_firmware.cgi do not require authentication, which allows remote attackers to execute arbitrary code.

On D-Link DIR-823G devices, the GoAhead configuration allows /HNAP1 Command Injection via shell metacharacters in the POST data, because this data is sent directly to the "system" library function.

On D-Link DIR-823G 2018-09-19 devices, the GoAhead configuration allows /HNAP1 RunReboot commands without authentication to trigger a reboot.

On D-Link DIR-823G 2018-09-19 devices, the GoAhead configuration allows /HNAP1 SetPasswdSettings commands without authentication to trigger an admin password change.

D-Link DCS series Wi-Fi cameras expose sensitive information regarding the device configuration. The affected devices include many of DCS series, such as: DCS-936L, DCS-942L, DCS-8000LH, DCS-942LB1, DCS-5222L, DCS-825L, DCS-2630L, DCS-820L, DCS-855L, DCS-2121, DCS-5222LB1, DCS-5020L, and many more. There are many affected firmware versions starting from 1.00 and above. The configuration file can be accessed remotely through: <Camera-IP>/common/info.cgi, with no authentication. The configuration file include the following fields: model, product, brand, version, build, hw_version, nipca version, device name, location, MAC address, IP address, gateway IP address, wireless status, input/output settings, speaker, and sensor settings.

D-Link DCS-825L devices with firmware 1.08 do not employ a suitable mechanism to prevent denial-of-service (DoS) attacks. An attacker can harm the device availability (i.e., live-online video/audio streaming) by using the hping3 tool to perform an IPv4 flood attack. Verified attacks includes SYN flooding, UDP flooding, ICMP flooding, and SYN-ACK flooding.

XSS exists in cgi-bin/webcm on D-link DSL-2640T routers via the var:RelaodHref or var:conid parameter.

An issue was discovered in D-Link 'myDlink Baby App' version 2.04.06. Whenever actions are performed from the app (e.g., change camera settings or play lullabies), it communicates directly with the Wi-Fi camera (D-Link 825L firmware 1.08) with the credentials (username and password) in base64 cleartext. An attacker could conduct an MitM attack on the local network and very easily obtain these credentials.

On D-Link DAP-1530 (A1) before firmware version 1.06b01, DAP-1610 (A1) before firmware version 1.06b01, DWR-111 (A1) before firmware version 1.02v02, DWR-116 (A1) before firmware version 1.06b03, DWR-512 (B1) before firmware version 2.02b01, DWR-711 (A1) through firmware version 1.11, DWR-712 (B1) before firmware version 2.04b01, DWR-921 (A1) before firmware version 1.02b01, and DWR-921 (B1) before firmware version 2.03b01, there exists an EXCU_SHELL file in the web directory. By sending a GET request with specially crafted headers to the /EXCU_SHELL URI, an attacker could execute arbitrary shell commands in the root context on the affected device. Other devices might be affected as well.

In the /HNAP1/SetRouterSettings message, the RemotePort parameter is vulnerable, and the vulnerability affects D-Link DIR-818LW Rev.A 2.05.B03 and DIR-822 B1 202KRb06 devices. In the SetRouterSettings.php source code, the RemotePort parameter is saved in the $path_inf_wan1."/web" internal configuration memory without any regex checking. And in the IPTWAN_build_command function of the iptwan.php source code, the data in $path_inf_wan1."/web" is used with the iptables command without any regex checking. A vulnerable /HNAP1/SetRouterSettings XML message could have shell metacharacters in the RemotePort element such as the `telnetd` string.

D-Link DIR-822 Rev.B 202KRb06, DIR-822 Rev.C 3.10B06, DIR-860L Rev.B 2.03.B03, DIR-868L Rev.B 2.05B02, DIR-880L Rev.A 1.20B01_01_i3se_BETA, and DIR-890L Rev.A 1.21B02_BETA devices mishandle IsAccessPoint in /HNAP1/SetAccessPointMode. In the SetAccessPointMode.php source code, the IsAccessPoint parameter is saved in the ShellPath script file without any regex checking. After the script file is executed, the command injection occurs. A vulnerable /HNAP1/SetAccessPointMode XML message could have shell metacharacters in the IsAccessPoint element such as the `telnetd` string.

In the /HNAP1/SetClientInfoDemo message, the AudioMute and AudioEnable parameters are vulnerable, and the vulnerabilities affect D-Link DIR-868L Rev.B 2.05B02 devices. In the SetClientInfoDemo.php source code, the AudioMute and AudioEnble parameters are saved in the ShellPath script file without any regex checking. After the script file is executed, the command injection occurs. It needs to bypass the wget command option with a single quote. A vulnerable /HNAP1/SetClientInfoDemo XML message could have single quotes and backquotes in the AudioMute or AudioEnable element, such as the '`telnetd`' string.

In the /HNAP1/SetQoSSettings message, the uplink parameter is vulnerable, and the vulnerability affects D-Link DIR-822 Rev.B 202KRb06 and DIR-822 Rev.C 3.10B06 devices. In the SetQoSSettings.php source code, the uplink parameter is saved in the /bwc/entry:1/bandwidth and /bwc/entry:2/bandwidth internal configuration memory without any regex checking. And in the bwc_tc_spq_start, bwc_tc_wfq_start, and bwc_tc_adb_start functions of the bwcsvcs.php source code, the data in /bwc/entry:1/bandwidth and /bwc/entry:2/bandwidth is used with the tc command without any regex checking. A vulnerable /HNAP1/SetQoSSettings XML message could have shell metacharacters in the uplink element such as the `telnetd` string.

In the /HNAP1/SetWiFiVerifyAlpha message, the WPSPIN parameter is vulnerable, and the vulnerability affects D-Link DIR-822 B1 202KRb06 devices. In the SetWiFiVerifyAlpha.php source code, the WPSPIN parameter is saved in the $rphyinf1."/media/wps/enrollee/pin" and $rphyinf2."/media/wps/enrollee/pin" and $rphyinf3."/media/wps/enrollee/pin" internal configuration memory without any regex checking. And in the do_wps function of the wps.php source code, the data in $rphyinf3."/media/wps/enrollee/pin" is used with the wpatalk command without any regex checking. A vulnerable /HNAP1/SetWiFiVerifyAlpha XML message could have shell metacharacters in the WPSPIN element such as the `telnetd` string.

An issue was discovered in /bin/boa on D-Link DIR-619L Rev.B 2.06B1 and DIR-605L Rev.B 2.12B1 devices. There is a stack-based buffer overflow allowing remote attackers to execute arbitrary code without authentication via the goform/formLanguageChange currTime parameter.

An issue was discovered in /bin/boa on D-Link DIR-619L Rev.B 2.06B1 and DIR-605L Rev.B 2.12B1 devices. goform/formSysCmd allows remote authenticated users to execute arbitrary OS commands via the sysCmd POST parameter.

D-Link DIR-816 A2 1.10 B05 devices allow arbitrary remote code execution without authentication via the newpass parameter. In the /goform/form2userconfig.cgi handler function, a long password may lead to a stack-based buffer overflow and overwrite a return address.

D-Link DCM-604 DCM604_C1_ViaCabo_1.04_20130606 and DCM-704 EU_DCM-704_1.10 devices allow remote attackers to discover credentials via iso.3.6.1.4.1.4491.2.4.1.1.6.1.1.0 and iso.3.6.1.4.1.4491.2.4.1.1.6.1.2.0 SNMP requests.

diag_ping.cmd on D-Link DSL-2640U devices with firmware IM_1.00 and ME_1.00, and DSL-2540U devices with firmware ME_1.00, allows authenticated remote attackers to execute arbitrary OS commands via shell metacharacters in the ipaddr field of an HTTP GET request.

On D-Link DIR-620 devices with a certain customized (by ISP) variant of firmware 1.0.3, 1.0.37, 1.3.1, 1.3.3, 1.3.7, 1.4.0, and 2.0.22, OS command injection is possible as a result of incorrect processing of the res_buf parameter to index.cgi.

On D-Link DIR-620 devices with a certain customized (by ISP) variant of firmware 1.0.3, 1.0.37, 1.3.1, 1.3.3, 1.3.7, 1.4.0, and 2.0.22, a reflected Cross-Site Scripting (XSS) attack is possible as a result of missed filtration for special characters in the "Search" field and incorrect processing of the XMLHttpRequest object.

In the web server on D-Link DIR-620 devices with a certain customized (by ISP) variant of firmware 1.0.3, 1.0.37, 1.3.1, 1.3.3, 1.3.7, 1.4.0, and 2.0.22, there is a hardcoded password of anonymous for the admin account.

XSS vulnerability in htdocs/webinc/js/adv_parent_ctrl_map.php in D-Link DIR-868L DIR868LA1_FW112b04 and previous versions, DIR-865L DIR-865L_REVA_FIRMWARE_PATCH_1.08.B01 and previous versions, and DIR-860L DIR860LA1_FW110b04 and previous versions allows remote attackers to read a cookie via a crafted deviceid parameter to soap.cgi.

XSS vulnerability in htdocs/webinc/body/bsc_sms_send.php in D-Link DIR-868L DIR868LA1_FW112b04 and previous versions, DIR-865L DIR-865L_REVA_FIRMWARE_PATCH_1.08.B01 and previous versions, and DIR-860L DIR860LA1_FW110b04 and previous versions allows remote attackers to read a cookie via a crafted receiver parameter to soap.cgi.

XSS vulnerability in htdocs/webinc/js/bsc_sms_inbox.php in D-Link DIR-868L DIR868LA1_FW112b04 and previous versions, DIR-865L DIR-865L_REVA_FIRMWARE_PATCH_1.08.B01 and previous versions, and DIR-860L DIR860LA1_FW110b04 and previous versions allows remote attackers to read a cookie via a crafted Treturn parameter to soap.cgi.

OS command injection vulnerability in soap.cgi (soapcgi_main in cgibin) in D-Link DIR-880L DIR-880L_REVA_FIRMWARE_PATCH_1.08B04 and previous versions, DIR-868L DIR868LA1_FW112b04 and previous versions, DIR-65L DIR-865L_REVA_FIRMWARE_PATCH_1.08.B01 and previous versions, and DIR-860L DIR860LA1_FW110b04 and previous versions allows remote attackers to execute arbitrary OS commands via the service parameter.

Cross Site Scripting (XSS) exists on the D-Link DIR-600M C1 3.01 via the SSID or the name of a user account.

An issue was discovered in D-Link mydlink+ 3.8.5 build 259 for DCS-933L 1.05.04 and DCS-934L 1.05.04 devices. The mydlink+ app sends the username and password for connected D-Link cameras (such as DCS-933L and DCS-934L) unencrypted from the app to the camera, allowing attackers to obtain these credentials and gain control of the camera including the ability to view the camera's stream and make changes without the user's knowledge.

Diagnostics functionality on D-Link DSL-3782 devices with firmware EU v. 1.01 has a buffer overflow, allowing authenticated remote attackers to execute arbitrary code via a long Addr value to the 'set Diagnostics_Entry' function in an HTTP request, related to /userfs/bin/tcapi.

authentication.cgi on D-Link DIR-868L devices with Singapore StarHub firmware before v1.21SHCb03 allows remote attackers to execute arbitrary code.

D-link DIR-825AC G1 devices have Insufficient Compartmentalization between a host network and a guest network that are established by the same device. A DHCP Request is sent to the router with a certain Transaction ID field. Following the DHCP protocol, the router responds with an ACK or NAK message. Studying the NAK case revealed that the router erroneously sends the NAK to both Host and Guest networks with the same Transaction ID as found in the DHCP Request. This allows encoding of data to be sent cross-router into the 32-bit Transaction ID field.

D-link DIR-825AC G1 devices have Insufficient Compartmentalization between a host network and a guest network that are established by the same device. In order to transfer data from the host network to the guest network, the sender joins and then leaves an IGMP group. After it leaves, the router (following the IGMP protocol) creates an IGMP Membership Query packet with the Group IP and sends it to both the Host and the Guest networks. The data is transferred within the Group IP field, which is completely controlled by the sender.

D-link DIR-825AC G1 devices have Insufficient Compartmentalization between a host network and a guest network that are established by the same device. They forward ARP requests, which are sent as broadcast packets, between the host and the guest networks. To use this leakage as a direct covert channel, the sender can trivially issue an ARP request to an arbitrary computer on the network. (In general, some routers restrict ARP forwarding only to requests destined for the network's subnet mask, but these routers did not restrict this traffic in any way. Depending on this factor, one must use either the lower 8 bits of the IP address, or the entire 32 bits, as the data payload.)

D-Link DSL-2875AL devices through 1.00.05 are prone to password disclosure via a simple crafted /romfile.cfg request to the web management server. This request doesn't require any authentication and will lead to saving the configuration file. The password is stored in cleartext.

D-Link DSL-2875AL and DSL-2877AL devices through 1.00.05 are prone to information disclosure via a simple crafted request to index.asp on the web management server because of username_v and password_v variables.

D-Link DIR-866L 1.03B04 devices allow XSS via HtmlResponseMessage in the device common gateway interface, leading to common injection.

D-Link DIR-822 Rev.Bx devices with firmware v.202KRb06 and older allow a buffer overflow via long MacAddress data in a /HNAP1/SetClientInfo HNAP protocol message, which is mishandled in /usr/sbin/udhcpd during reading of the /var/servd/LAN-1-udhcpd.conf file.

An issue was discovered on D-Link DIR-823G devices with firmware through 1.02B03. A command Injection vulnerability allows attackers to execute arbitrary OS commands via shell metacharacters in a crafted /HNAP1 request. This occurs when the GetNetworkTomographyResult function calls the system function with an untrusted input parameter named Address. Consequently, an attacker can execute any command remotely when they control this input.

An issue was discovered on D-Link DIR-825 Rev.B 2.10 devices. They allow remote attackers to execute arbitrary commands via the ntp_server parameter in an ntp_sync.cgi POST request.

An issue was discovered on D-Link DIR-825 Rev.B 2.10 devices. The "user" account has a blank password.

An issue was discovered on D-Link DIR-878 1.12B01 devices. At the /HNAP1 URI, an attacker can log in with a blank password.

An issue was discovered on D-Link DIR-878 1.12B01 devices. Because strncpy is misused, there is a stack-based buffer overflow vulnerability that does not require authentication via the HNAP_AUTH HTTP header.

An issue was discovered on D-Link DIR-825 Rev.B 2.10 devices. There is an information disclosure vulnerability via requests for the router_info.xml document. This will reveal the PIN code, MAC address, routing table, firmware version, update time, QOS information, LAN information, and WLAN information of the device.

This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of D-Link DIR-867, DIR-878, and DIR-882 routers with firmware 1.20B10_BETA. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of HNAP requests. The issue results from incorrect string matching logic when accessing protected pages. An attacker can leverage this vulnerability to escalate privileges and execute code in the context of the router. Was ZDI-CAN-10835.

An issue was discovered in apply.cgi on D-Link DAP-1520 devices before 1.10b04Beta02. Whenever a user performs a login action from the web interface, the request values are being forwarded to the ssi binary. On the login page, the web interface restricts the password input field to a fixed length of 15 characters. The problem is that validation is being done on the client side, hence it can be bypassed. When an attacker manages to intercept the login request (POST based) and tampers with the vulnerable parameter (log_pass), to a larger length, the request will be forwarded to the webserver. This results in a stack-based buffer overflow. A few other POST variables, (transferred as part of the login request) are also vulnerable: html_response_page and log_user.

An issue was discovered on D-Link DIR-816L devices 2.x before 1.10b04Beta02. Universal Plug and Play (UPnP) is enabled by default on port 1900. An attacker can perform command injection by injecting a payload into the Search Target (ST) field of the SSDP M-SEARCH discover packet.

An issue was discovered on D-Link DIR-816L devices 2.x before 1.10b04Beta02. There exists an exposed administration function in getcfg.php, which can be used to call various services. It can be utilized by an attacker to retrieve various sensitive information, such as admin login credentials, by setting the value of _POST_SERVICES in the query string to DEVICE.ACCOUNT.

An XSS issue was discovered on D-Link DIR-816L devices 2.x before 1.10b04Beta02. In the file webinc/js/info.php, no output filtration is applied to the RESULT parameter, before it's printed on the webpage.

An issue was discovered on D-Link DCS-2530L before 1.06.01 Hotfix and DCS-2670L through 2.02 devices. The unauthenticated /config/getuser endpoint allows for remote administrator password disclosure.

An issue was discovered on D-Link DIR-825 R1 devices through 3.0.1 before 2020-11-20. A buffer overflow in the web interface allows attackers to achieve pre-authentication remote code execution.

An issue was discovered on D-Link DSL-2640B E1 EU_1.01 devices. The administrative interface doesn't perform authentication checks for a firmware-update POST request. Any attacker that can access the administrative interface can install firmware of their choice.

D-Link DSL-320B-D1 devices through EU_1.25 are prone to multiple Stack-Based Buffer Overflows that allow unauthenticated remote attackers to take over a device via the login.xgi user and pass parameters. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-2020 v1.01rc001 Wi-Fi access points. Authentication is not required to exploit this vulnerability. The specific flaw exists within the processing of CGI scripts. When parsing the getpage parameter, the process does not properly validate the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-10932.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-2020 v1.01rc001 Wi-Fi access points. Authentication is not required to exploit this vulnerability. The specific flaw exists within the processing of CGI scripts. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-11369.

This vulnerability allows network-adjacent attackers to disclose sensitive information on affected installations of D-Link DAP-2020 v1.01rc001 Wi-Fi access points. Authentication is not required to exploit this vulnerability. The specific flaw exists within the processing of CGI scripts. When parsing the errorpage request parameter, the process does not properly validate a user-supplied path prior to using it in file operations. An attacker can leverage this vulnerability to disclose stored credentials, leading to further compromise. Was ZDI-CAN-11856.

Several web interfaces in D-Link DIR-868LW 1.12b have no authentication requirements for access, allowing for attackers to obtain users' DNS query history.

DCS-5000L v1.05 and DCS-932L v2.17 and older are affecged by Incorrect Acess Control. The use of the basic authentication for the devices command interface allows attack vectors that may compromise the cameras configuration and allow malicious users on the LAN to access the device. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-1935 1.03 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the handling of ConfigFileUpload requests to the web management portal. The issue results from the lack of proper validation of a user-supplied string before using it as a format specifier. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-16141.

This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of D-Link DIR-1935 1.03 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of HNAP login requests. The issue results from the lack of proper implementation of the authentication algorithm. An attacker can leverage this vulnerability to bypass authentication on the system. Was ZDI-CAN-16142.

This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of D-Link DIR-1935 1.03 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of HNAP login requests. The issue results from an incorrectly implemented comparison. An attacker can leverage this vulnerability to bypass authentication on the system. Was ZDI-CAN-16152.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-1935 1.03 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of Login requests to the web management portal. When parsing the HNAP_AUTH header, the process does not properly validate the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-16139.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-1935 1.03 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the handling of SetWebFilterSetting requests to the web management portal. When parsing the WebFilterURLs element, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-16140.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-1935 1.03 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the handling of SetStaticRouteIPv6Settings requests to the web management portal. When parsing subelements within the StaticRouteIPv6List element, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-16145.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-1935 1.03 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the handling of SetStaticRouteIPv4Settings requests to the web management portal. When parsing the NetMask element, the process does not properly validate the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-16144.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-1935 1.03 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the handling of SetIPv4FirewallSettings requests to the web management portal. When parsing subelements within the IPv4FirewallRule element, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-16146.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-1935 1.03 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the handling of SetStaticRouteIPv4Settings requests to the web management portal. When parsing subelements within the StaticRouteIPv4Data element, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-16147.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-1935 1.03 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the handling of SetIPv6FirewallSettings requests to the web management portal. When parsing subelements within the IPv6FirewallRule element, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-16148.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-1935 1.03 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the handling of SetSysEmailSettings requests to the web management portal. When parsing subelements within the SetSysEmailSettings element, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-16149.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-1935 1.03 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of http requests to the web management portal. When parsing the SOAPAction header, the process does not properly validate the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-16150.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-1935 1.03 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the handling of SetVirtualServerSettings requests to the web management portal. When parsing subelements within the VirtualServerInfo element, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-16151.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-1935 1.03 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the handling of SetQoSSettings requests to the web management portal. When parsing subelements within the QoSInfo element, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-16153.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-1935 1.03 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the handling of SetSysLogSettings requests to the web management portal. When parsing the IPAddress element, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-16154.

D-Link DVG-G5402SP GE_1.03 was discovered to contain a command injection vulnerability via the Maintenance function.

An access control issue in D-Link DVG-G5402SP GE_1.03 allows unauthenticated attackers to escalate privileges via arbitrarily editing VoIP SIB profiles.

A command injection vulnerability in the firmware_update command, in the device's restricted telnet interface, allows an authenticated attacker to execute arbitrary commands as root.

D-Link DPH-400S/SE VoIP Phone v1.01 contains hardcoded provisioning variables, including PROVIS_USER_PASSWORD, which may expose sensitive user credentials. An attacker with access to the firmware image can extract these credentials using static analysis tools such as strings or xxd, potentially leading to unauthorized access to device functions or user accounts. This vulnerability exists due to insecure storage of sensitive information in the firmware binary.