In Envoy through 1.11.1, users may configure a route to match incoming path headers via the libstdc++ regular expression implementation. A remote attacker may send a request with a very long URI to result in a denial of service (memory consumption). This is a related issue to CVE-2019-14993.

Upon receiving each incoming request header data, Envoy will iterate over existing request headers to verify that the total size of the headers stays below a maximum limit. The implementation in versions 1.10.0 through 1.11.1 for HTTP/1.x traffic and all versions of Envoy for HTTP/2 traffic had O(n^2) performance characteristics. A remote attacker may craft a request that stays below the maximum request header size but consists of many thousands of small headers to consume CPU and result in a denial-of-service attack.

An issue was discovered in Envoy 1.12.0. An untrusted remote client may send HTTP/2 requests that write to the heap outside of the request buffers when the upstream is HTTP/1. This may be used to corrupt nearby heap contents (leading to a query-of-death scenario) or may be used to bypass Envoy's access control mechanisms such as path based routing. An attacker can also modify requests from other users that happen to be proximal temporally and spatially.

An issue was discovered in Envoy 1.12.0. An untrusted remote client may send an HTTP header (such as Host) with whitespace after the header content. Envoy will treat "header-value " as a different string from "header-value" so for example with the Host header "example.com " one could bypass "example.com" matchers.

Envoy 1.12.0 allows a remote denial of service because of resource loops, as demonstrated by a single idle TCP connection being able to keep a worker thread in an infinite busy loop when continue_on_listener_filters_timeout is used."

An issue was discovered in Envoy 1.12.0. Upon receipt of a malformed HTTP request without a Host header, it sends an internally generated "Invalid request" response. This internally generated response is dispatched through the configured encoder filter chain before being sent to the client. An encoder filter that invokes route manager APIs that access a request's Host header causes a NULL pointer dereference, resulting in abnormal termination of the Envoy process.

When parsing HTTP/1.x header values, Envoy 1.9.0 and before does not reject embedded zero characters (NUL, ASCII 0x0). This allows remote attackers crafting header values containing embedded NUL characters to potentially bypass header matching rules, gaining access to unauthorized resources.

Envoy 1.9.0 and before does not normalize HTTP URL paths. A remote attacker may craft a relative path, e.g., something/../admin, to bypass access control, e.g., a block on /admin. A backend server could then interpret the non-normalized path and provide an attacker access beyond the scope provided for by the access control policy.

Istio through 1.5.1 and Envoy through 1.14.1 have a data-leak issue. If there is a TCP connection (negotiated with SNI over HTTPS) to *.example.com, a request for a domain concurrently configured explicitly (e.g., abc.example.com) is sent to the server(s) listening behind *.example.com. The outcome should instead be 421 Misdirected Request. Imagine a shared caching forward proxy re-using an HTTP/2 connection for a large subnet with many users. If a victim is interacting with abc.example.com, and a server (for abc.example.com) recycles the TCP connection to the forward proxy, the victim's browser may suddenly start sending sensitive data to a *.example.com server. This occurs because the forward proxy between the victim and the origin server reuses connections (which obeys the specification), but neither Istio nor Envoy corrects this by sending a 421 error. Similarly, this behavior voids the security model browsers have put in place between domains.

Envoy version 1.14.2, 1.13.2, 1.12.4 or earlier may consume excessive amounts of memory when proxying HTTP/2 requests or responses with many small (i.e. 1 byte) data frames.

Envoy version 1.14.2, 1.13.2, 1.12.4 or earlier is susceptible to increased memory usage in the case where an HTTP/2 client requests a large payload but does not send enough window updates to consume the entire stream and does not reset the stream.

Envoy version 1.14.2, 1.13.2, 1.12.4 or earlier may consume excessive amounts of memory when processing HTTP/1.1 headers with long field names or requests with long URLs.

In Envoy before versions 1.12.6, 1.13.4, 1.14.4, and 1.15.0 when validating TLS certificates, Envoy would incorrectly allow a wildcard DNS Subject Alternative Name apply to multiple subdomains. For example, with a SAN of *.example.com, Envoy would incorrectly allow nested.subdomain.example.com, when it should only allow subdomain.example.com. This defect applies to both validating a client TLS certificate in mTLS, and validating a server TLS certificate for upstream connections. This vulnerability is only applicable to situations where an untrusted entity can obtain a signed wildcard TLS certificate for a domain of which you only intend to trust a subdomain of. For example, if you intend to trust api.mysubdomain.example.com, and an untrusted actor can obtain a signed TLS certificate for *.example.com or *.com. Configurations are vulnerable if they use verify_subject_alt_name in any Envoy version, or if they use match_subject_alt_names in version 1.14 or later. This issue has been fixed in Envoy versions 1.12.6, 1.13.4, 1.14.4, 1.15.0.

Envoy through 1.15.0 only considers the first value when multiple header values are present for some HTTP headers. Envoy’s setCopy() header map API does not replace all existing occurences of a non-inline header.

Envoy master between 2d69e30 and 3b5acb2 may fail to parse request URL that requires host canonicalization.

Envoy before 1.16.1 logs an incorrect downstream address because it considers only the directly connected peer, not the information in the proxy protocol header. This affects situations with tcp-proxy as the network filter (not HTTP filters).

Envoy before 1.16.1 mishandles dropped and truncated datagrams, as demonstrated by a segmentation fault for a UDP packet size larger than 1500.

CNCF Envoy through 1.13.0 TLS inspector bypass. TLS inspector could have been bypassed (not recognized as a TLS client) by a client using only TLS 1.3. Because TLS extensions (SNI, ALPN) were not inspected, those connections might have been matched to a wrong filter chain, possibly bypassing some security restrictions in the process.

Envoy version 1.14.2, 1.13.2, 1.12.4 or earlier may exhaust file descriptors and/or memory when accepting too many connections.

Envoy is a cloud-native high-performance edge/middle/service proxy. In Envoy version 1.17.0 an attacker can bypass authentication by presenting a JWT token with an issuer that is not in the provider list when Envoy's JWT Authentication filter is configured with the `allow_missing` requirement under `requires_any` due to a mistake in implementation. Envoy's JWT Authentication filter can be configured with the `allow_missing` requirement that will be satisfied if JWT is missing (JwtMissed error) and fail if JWT is presented or invalid. Due to a mistake in implementation, a JwtUnknownIssuer error was mistakenly converted to JwtMissed when `requires_any` was configured. So if `allow_missing` was configured under `requires_any`, an attacker can bypass authentication by presenting a JWT token with an issuer that is not in the provider list. Integrity may be impacted depending on configuration if the JWT token is used to protect against writes or modifications. This regression was introduced on 2020/11/12 in PR 13839 which fixed handling `allow_missing` under RequiresAny in a JwtRequirement (see issue 13458). The AnyVerifier aggregates the children verifiers' results into a final status where JwtMissing is the default error. However, a JwtUnknownIssuer was mistakenly treated the same as a JwtMissing error and the resulting final aggregation was the default JwtMissing. As a result, `allow_missing` would allow a JWT token with an unknown issuer status. This is fixed in version 1.17.1 by PR 15194. The fix works by preferring JwtUnknownIssuer over a JwtMissing error, fixing the accidental conversion and bypass with `allow_missing`. A user could detect whether a bypass occurred if they have Envoy logs enabled with debug verbosity. Users can enable component level debug logs for JWT. The JWT filter logs will indicate that there is a request with a JWT token and a failure that the JWT token is missing.

An issue was discovered in Envoy through 1.71.1. There is a remotely exploitable integer overflow in which a very large grpc-timeout value leads to unexpected timeout calculations.

An issue was discovered in Envoy through 1.71.1. There is a remotely exploitable NULL pointer dereference and crash in TLS when an unknown TLS alert code is received.

An issue was discovered in Envoy 1.14.0. There is a remotely exploitable crash for HTTP2 Metadata, because an empty METADATA map triggers a Reachable Assertion.

Envoy is a cloud-native edge/middle/service proxy. Envoy does not decode escaped slash sequences `%2F` and `%5C` in HTTP URL paths in versions 1.18.2 and before. A remote attacker may craft a path with escaped slashes, e.g. `/something%2F..%2Fadmin`, to bypass access control, e.g. a block on `/admin`. A backend server could then decode slash sequences and normalize path and provide an attacker access beyond the scope provided for by the access control policy. ### Impact Escalation of Privileges when using RBAC or JWT filters with enforcement based on URL path. Users with back end servers that interpret `%2F` and `/` and `%5C` and `\` interchangeably are impacted. ### Attack Vector URL paths containing escaped slash characters delivered by untrusted client. Patches in versions 1.18.3, 1.17.3, 1.16.4, 1.15.5 contain new path normalization option to decode escaped slash characters. As a workaround, if back end servers treat `%2F` and `/` and `%5C` and `\` interchangeably and a URL path based access control is configured, one may reconfigure the back end server to not treat `%2F` and `/` and `%5C` and `\` interchangeably.

Envoy is an open source L7 proxy and communication bus designed for large modern service oriented architectures. In affected versions when ext-authz extension is sending request headers to the external authorization service it must merge multiple value headers according to the HTTP spec. However, only the last header value is sent. This may allow specifically crafted requests to bypass authorization. Attackers may be able to escalate privileges when using ext-authz extension or back end service that uses multiple value headers for authorization. A specifically constructed request may be delivered by an untrusted downstream peer in the presence of ext-authz extension. Envoy versions 1.19.1, 1.18.4, 1.17.4, 1.16.5 contain fixes to the ext-authz extension to correctly merge multiple request header values, when sending request for authorization.

Envoy is an open source L7 proxy and communication bus designed for large modern service oriented architectures. In affected versions envoy’s procedure for resetting a HTTP/2 stream has O(N^2) complexity, leading to high CPU utilization when a large number of streams are reset. Deployments are susceptible to Denial of Service when Envoy is configured with high limit on H/2 concurrent streams. An attacker wishing to exploit this vulnerability would require a client opening and closing a large number of H/2 streams. Envoy versions 1.19.1, 1.18.4, 1.17.4, 1.16.5 contain fixes to reduce time complexity of resetting HTTP/2 streams. As a workaround users may limit the number of simultaneous HTTP/2 dreams for upstream and downstream peers to a low number, i.e. 100.

Envoy is an open source L7 proxy and communication bus designed for large modern service oriented architectures. In affected versions envoy incorrectly handled a URI '#fragment' element as part of the path element. Envoy is configured with an RBAC filter for authorization or similar mechanism with an explicit case of a final "/admin" path element, or is using a negative assertion with final path element of "/admin". The client sends request to "/app1/admin#foo". In Envoy prior to 1.18.0, or 1.18.0+ configured with path_normalization=false. Envoy treats fragment as a suffix of the query string when present, or as a suffix of the path when query string is absent, so it evaluates the final path element as "/admin#foo" and mismatches with the configured "/admin" path element. In Envoy 1.18.0+ configured with path_normalization=true. Envoy transforms this to /app1/admin%23foo and mismatches with the configured /admin prefix. The resulting URI is sent to the next server-agent with the offending "#foo" fragment which violates RFC3986 or with the nonsensical "%23foo" text appended. A specifically constructed request with URI containing '#fragment' element delivered by an untrusted client in the presence of path based request authorization resulting in escalation of Privileges when path based request authorization extensions. Envoy versions 1.19.1, 1.18.4, 1.17.4, 1.16.5 contain fixes that removes fragment from URI path in incoming requests.

Envoy is an open source L7 proxy and communication bus designed for large modern service oriented architectures. In affected versions Envoy transitions a H/2 connection to the CLOSED state when it receives a GOAWAY frame without any streams outstanding. The connection state is transitioned to DRAINING when it receives a SETTING frame with the SETTINGS_MAX_CONCURRENT_STREAMS parameter set to 0. Receiving these two frames in the same I/O event results in abnormal termination of the Envoy process due to invalid state transition from CLOSED to DRAINING. A sequence of H/2 frames delivered by an untrusted upstream server will result in Denial of Service in the presence of untrusted **upstream** servers. Envoy versions 1.19.1, 1.18.4 contain fixes to stop processing of pending H/2 frames after connection transition to the CLOSED state.

Envoy is an open source L7 proxy and communication bus designed for large modern service oriented architectures. In affected versions after Envoy sends a locally generated response it must stop further processing of request or response data. However when local response is generated due the internal buffer overflow while request or response is processed by the filter chain the operation may not be stopped completely and result in accessing a freed memory block. A specifically constructed request delivered by an untrusted downstream or upstream peer in the presence of extensions that modify and increase the size of request or response bodies resulting in a Denial of Service when using extensions that modify and increase the size of request or response bodies, such as decompressor filter. Envoy versions 1.19.1, 1.18.4, 1.17.4, 1.16.5 contain fixes to address incomplete termination of request processing after locally generated response. As a workaround disable Envoy's decompressor, json-transcoder or grpc-web extensions or proprietary extensions that modify and increase the size of request or response bodies, if feasible.

Pomerium is an open source identity-aware access proxy. Envoy, which Pomerium is based on, can abnormally terminate if an H/2 GOAWAY and SETTINGS frame are received in the same IO event. This can lead to a DoS in the presence of untrusted *upstream* servers. 0.15.1 contains an upgraded envoy binary with this vulnerability patched. If only trusted upstreams are configured, there is not substantial risk of this condition being triggered.

Pomerium is an open source identity-aware access proxy. Envoy, which Pomerium is based on, incorrectly handles resetting of HTTP/2 streams with excessive complexity. This can lead to high CPU utilization when a large number of streams are reset. This can result in a DoS condition. Pomerium versions 0.14.8 and 0.15.1 contain an upgraded envoy binary with this vulnerability patched.

Pomerium is an open source identity-aware access proxy. Envoy, which Pomerium is based on, contains two authorization related vulnerabilities CVE-2021-32777 and CVE-2021-32779. This may lead to incorrect routing or authorization policy decisions. With specially crafted requests, incorrect authorization or routing decisions may be made by Pomerium. Pomerium v0.14.8 and v0.15.1 contain an upgraded envoy binary with these vulnerabilities patched. This issue can only be triggered when using path prefix based policy. Removing any such policies should provide mitigation.

Envoy is an open source edge and service proxy, designed for cloud-native applications. In affected versions a crafted request crashes Envoy when a CONNECT request is sent to JWT filter configured with regex match. This provides a denial of service attack vector. The only workaround is to not use regex in the JWT filter. Users are advised to upgrade.

Envoy is an open source edge and service proxy, designed for cloud-native applications. Sending a locally generated response must stop further processing of request or response data. Envoy tracks the amount of buffered request and response data and aborts the request if the amount of buffered data is over the limit by sending 413 or 500 responses. However when the buffer overflows while response is processed by the filter chain the operation may not be aborted correctly and result in accessing a freed memory block. If this happens Envoy will crash resulting in a denial of service.

Envoy is an open source edge and service proxy, designed for cloud-native applications. In affected versions of Envoy a crash occurs when configured for :ref:`upstream tunneling <envoy_v3_api_field_extensions.filters.network.tcp_proxy.v3.TcpProxy.tunneling_config>` and the downstream connection disconnects while the the upstream connection or http/2 stream is still being established. There are no workarounds for this issue. Users are advised to upgrade.

Envoy is an open source edge and service proxy, designed for cloud-native applications. Envoy's tls allows re-use when some cert validation settings have changed from their default configuration. The only workaround for this issue is to ensure that default tls settings are used. Users are advised to upgrade.

Envoy is an open source edge and service proxy, designed for cloud-native applications. The envoy common router will segfault if an internal redirect selects a route configured with direct response or redirect actions. This will result in a denial of service. As a workaround turn off internal redirects if direct response entries are configured on the same listener.

Envoy is an open source edge and service proxy, designed for cloud-native applications. The default_validator.cc implementation used to implement the default certificate validation routines has a "type confusion" bug when processing subjectAltNames. This processing allows, for example, an rfc822Name or uniformResourceIndicator to be authenticated as a domain name. This confusion allows for the bypassing of nameConstraints, as processed by the underlying OpenSSL/BoringSSL implementation, exposing the possibility of impersonation of arbitrary servers. As a result Envoy will trust upstream certificates that should not be trusted.

Envoy is an open source edge and service proxy, designed for cloud-native applications. In affected versions Envoy does not restrict the set of certificates it accepts from the peer, either as a TLS client or a TLS server, to only those certificates that contain the necessary extendedKeyUsage (id-kp-serverAuth and id-kp-clientAuth, respectively). This means that a peer may present an e-mail certificate (e.g. id-kp-emailProtection), either as a leaf certificate or as a CA in the chain, and it will be accepted for TLS. This is particularly bad when combined with the issue described in pull request #630, in that it allows a Web PKI CA that is intended only for use with S/MIME, and thus exempted from audit or supervision, to issue TLS certificates that will be accepted by Envoy. As a result Envoy will trust upstream certificates that should not be trusted. There are no known workarounds to this issue. Users are advised to upgrade.

Envoy is an open source edge and service proxy, designed for cloud-native applications. When a cluster is deleted via Cluster Discovery Service (CDS) all idle connections established to endpoints in that cluster are disconnected. A recursion was introduced in the procedure of disconnecting idle connections that can lead to stack exhaustion and abnormal process termination when a cluster has a large number of idle connections. This infinite recursion causes Envoy to crash. Users are advised to upgrade.

Envoy is a cloud-native high-performance proxy. Versions of envoy prior to 1.22.1 are subject to a segmentation fault in the GrpcHealthCheckerImpl. Envoy can perform various types of upstream health checking. One of them uses gRPC. Envoy also has a feature which can “hold” (prevent removal) upstream hosts obtained via service discovery until configured active health checking fails. If an attacker controls an upstream host and also controls service discovery of that host (via DNS, the EDS API, etc.), an attacker can crash Envoy by forcing removal of the host from service discovery, and then failing the gRPC health check request. This will crash Envoy via a null pointer dereference. Users are advised to upgrade to resolve this vulnerability. Users unable to upgrade may disable gRPC health checking and/or replace it with a different health checking type as a mitigation.

Envoy is a cloud-native high-performance proxy. In versions prior to 1.22.1 secompressors accumulate decompressed data into an intermediate buffer before overwriting the body in the decode/encodeBody. This may allow an attacker to zip bomb the decompressor by sending a small highly compressed payload. Maliciously constructed zip files may exhaust system memory and cause a denial of service. Users are advised to upgrade. Users unable to upgrade may consider disabling decompression.

Envoy is a cloud-native high-performance proxy. In versions prior to 1.22.1 the OAuth filter implementation does not include a mechanism for validating access tokens, so by design when the HMAC signed cookie is missing a full authentication flow should be triggered. However, the current implementation assumes that access tokens are always validated thus allowing access in the presence of any access token attached to the request. Users are advised to upgrade. There is no known workaround for this issue.

Envoy is a cloud-native high-performance edge/middle/service proxy. In versions prior to 1.22.1 if Envoy attempts to send an internal redirect of an HTTP request consisting of more than HTTP headers, there’s a lifetime bug which can be triggered. If while replaying the request Envoy sends a local reply when the redirect headers are processed, the downstream state indicates that the downstream stream is not complete. On sending the local reply, Envoy will attempt to reset the upstream stream, but as it is actually complete, and deleted, this result in a use-after-free. Users are advised to upgrade. Users unable to upgrade are advised to disable internal redirects if crashes are observed.

Envoy is a cloud-native high-performance proxy. In versions prior to 1.22.1 the OAuth filter would try to invoke the remaining filters in the chain after emitting a local response, which triggers an ASSERT() in newer versions and corrupts memory on earlier versions. continueDecoding() shouldn’t ever be called from filters after a local reply has been sent. Users are advised to upgrade. There are no known workarounds for this issue.

Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to versions 1.26.0, 1.25.3, 1.24.4, 1.23.6, and 1.22.9, the client may bypass JSON Web Token (JWT) checks and forge fake original paths. The header `x-envoy-original-path` should be an internal header, but Envoy does not remove this header from the request at the beginning of request processing when it is sent from an untrusted client. The faked header would then be used for trace logs and grpc logs, as well as used in the URL used for `jwt_authn` checks if the `jwt_authn` filter is used, and any other upstream use of the x-envoy-original-path header. Attackers may forge a trusted `x-envoy-original-path` header. Versions 1.26.0, 1.25.3, 1.24.4, 1.23.6, and 1.22.9 have patches for this issue.

Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to versions 1.26.0, 1.25.3, 1.24.4, 1.23.6, and 1.22.9, escalation of privileges is possible when `failure_mode_allow: true` is configured for `ext_authz` filter. For affected components that are used for logging and/or visibility, requests may not be logged by the receiving service. When Envoy was configured to use ext_authz, ext_proc, tap, ratelimit filters, and grpc access log service and an http header with non-UTF-8 data was received, Envoy would generate an invalid protobuf message and send it to the configured service. The receiving service would typically generate an error when decoding the protobuf message. For ext_authz that was configured with ``failure_mode_allow: true``, the request would have been allowed in this case. For the other services, this could have resulted in other unforeseen errors such as a lack of visibility into requests. As of versions 1.26.0, 1.25.3, 1.24.4, 1.23.6, and 1.22.9, Envoy by default sanitizes the values sent in gRPC service calls to be valid UTF-8, replacing data that is not valid UTF-8 with a `!` character. This behavioral change can be temporarily reverted by setting runtime guard `envoy.reloadable_features.service_sanitize_non_utf8_strings` to false. As a workaround, one may set `failure_mode_allow: false` for `ext_authz`.

Envoy is an open source edge and service proxy designed for cloud-native applications. Compliant HTTP/1 service should reject malformed request lines. Prior to versions 1.26.0, 1.25.3, 1.24.4, 1.23.6, and 1.22.9, There is a possibility that non compliant HTTP/1 service may allow malformed requests, potentially leading to a bypass of security policies. This issue is fixed in versions 1.26.0, 1.25.3, 1.24.4, 1.23.6, and 1.22.9.

Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to versions 1.26.0, 1.25.3, 1.24.4, 1.23.6, and 1.22.9, the Lua filter is vulnerable to denial of service. Attackers can send large request bodies for routes that have Lua filter enabled and trigger crashes. As of versions versions 1.26.0, 1.25.3, 1.24.4, 1.23.6, and 1.22.9, Envoy no longer invokes the Lua coroutine if the filter has been reset. As a workaround for those whose Lua filter is buffering all requests/ responses, mitigate by using the buffer filter to avoid triggering the local reply in the Lua filter.

Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to versions 1.26.0, 1.25.3, 1.24.4, 1.23.6, and 1.22.9, Envoy does not sanitize or escape request properties when generating request headers. This can lead to characters that are illegal in header values to be sent to the upstream service. In the worst case, it can cause upstream service to interpret the original request as two pipelined requests, possibly bypassing the intent of Envoy’s security policy. Versions 1.26.0, 1.25.3, 1.24.4, 1.23.6, and 1.22.9 contain a patch. As a workaround, disable adding request headers based on the downstream request properties, such as downstream certificate properties.

Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to versions 1.26.0, 1.25.3, 1.24.4, 1.23.6, and 1.22.9, the OAuth filter assumes that a `state` query param is present on any response that looks like an OAuth redirect response. Sending it a request with the URI path equivalent to the redirect path, without the `state` parameter, will lead to abnormal termination of Envoy process. Versions 1.26.0, 1.25.3, 1.24.4, 1.23.6, and 1.22.9 contain a patch. The issue can also be mitigated by locking down OAuth traffic, disabling the filter, or by filtering traffic before it reaches the OAuth filter (e.g. via a lua script).

Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to versions 1.27.0, 1.26.4, 1.25.9, 1.24.10, and 1.23.12, a malicious client is able to construct credentials with permanent validity in some specific scenarios. This is caused by the some rare scenarios in which HMAC payload can be always valid in OAuth2 filter's check. Versions 1.27.0, 1.26.4, 1.25.9, 1.24.10, and 1.23.12 have a fix for this issue. As a workaround, avoid wildcards/prefix domain wildcards in the host's domain configuration.

Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to versions 1.27.0, 1.26.4, 1.25.9, 1.24.10, and 1.23.12, gRPC access loggers using listener's global scope can cause a `use-after-free` crash when the listener is drained. Versions 1.27.0, 1.26.4, 1.25.9, 1.24.10, and 1.23.12 have a fix for this issue. As a workaround, disable gRPC access log or stop listener update.

Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to versions 1.27.0, 1.26.4, 1.25.9, 1.24.10, and 1.23.12, the CORS filter will segfault and crash Envoy when the `origin` header is removed and deleted between `decodeHeaders`and `encodeHeaders`. Versions 1.27.0, 1.26.4, 1.25.9, 1.24.10, and 1.23.12 have a fix for this issue. As a workaround, do not remove the `origin` header in the Envoy configuration.

Envoy is an open source edge and service proxy designed for cloud-native applications. Envoy allows mixed-case schemes in HTTP/2, however, some internal scheme checks are case-sensitive. Prior to versions 1.27.0, 1.26.4, 1.25.9, 1.24.10, and 1.23.12, this can lead to the rejection of requests with mixed-case schemes such as `htTp` or `htTps`, or the bypassing of some requests such as `https` in unencrypted connections. With a fix in versions 1.27.0, 1.26.4, 1.25.9, 1.24.10, and 1.23.12, Envoy will now lowercase scheme values by default, and change the internal scheme checks that were case-sensitive to be case-insensitive. There are no known workarounds for this issue.

Envoy is a cloud-native high-performance edge/middle/service proxy. Envoy’s HTTP/2 codec may leak a header map and bookkeeping structures upon receiving `RST_STREAM` immediately followed by the `GOAWAY` frames from an upstream server. In nghttp2, cleanup of pending requests due to receipt of the `GOAWAY` frame skips de-allocation of the bookkeeping structure and pending compressed header. The error return [code path] is taken if connection is already marked for not sending more requests due to `GOAWAY` frame. The clean-up code is right after the return statement, causing memory leak. Denial of service through memory exhaustion. This vulnerability was patched in versions(s) 1.26.3, 1.25.8, 1.24.9, 1.23.11.

The HTTP/2 protocol allows a denial of service (server resource consumption) because request cancellation can reset many streams quickly, as exploited in the wild in August through October 2023.

Envoy is a high-performance edge/middle/service proxy. Envoy will crash when certain timeouts happen within the same interval. The crash occurs when the following are true: 1. hedge_on_per_try_timeout is enabled, 2. per_try_idle_timeout is enabled (it can only be done in configuration), 3. per-try-timeout is enabled, either through headers or configuration and its value is equal, or within the backoff interval of the per_try_idle_timeout. This issue has been addressed in released 1.29.1, 1.28.1, 1.27.3, and 1.26.7. Users are advised to upgrade. There are no known workarounds for this vulnerability.

Envoy is a high-performance edge/middle/service proxy. The regex expression is compiled for every request and can result in high CPU usage and increased request latency when multiple routes are configured with such matchers. This issue has been addressed in released 1.29.1, 1.28.1, 1.27.3, and 1.26.7. Users are advised to upgrade. There are no known workarounds for this vulnerability.

Envoy is a high-performance edge/middle/service proxy. External authentication can be bypassed by downstream connections. Downstream clients can force invalid gRPC requests to be sent to ext_authz, circumventing ext_authz checks when failure_mode_allow is set to true. This issue has been addressed in released 1.29.1, 1.28.1, 1.27.3, and 1.26.7. Users are advised to upgrade. There are no known workarounds for this vulnerability.

Envoy is a high-performance edge/middle/service proxy. Envoy crashes in Proxy protocol when using an address type that isn’t supported by the OS. Envoy is susceptible to crashing on a host with IPv6 disabled and a listener config with proxy protocol enabled when it receives a request where the client presents its IPv6 address. It is valid for a client to present its IPv6 address to a target server even though the whole chain is connected via IPv4. This issue has been addressed in released 1.29.1, 1.28.1, 1.27.3, and 1.26.7. Users are advised to upgrade. There are no known workarounds for this vulnerability.

Envoy is a cloud-native, open source edge and service proxy. A theoretical request smuggling vulnerability exists through Envoy if a server can be tricked into adding an upgrade header into a response. Per RFC https://www.rfc-editor.org/rfc/rfc7230#section-6.7 a server sends 101 when switching protocols. Envoy incorrectly accepts a 200 response from a server when requesting a protocol upgrade, but 200 does not indicate protocol switch. This opens up the possibility of request smuggling through Envoy if the server can be tricked into adding the upgrade header to the response.

Envoy is a high-performance edge/middle/service proxy. When PPv2 is enabled both on a listener and subsequent cluster, the Envoy instance will segfault when attempting to craft the upstream PPv2 header. This occurs when the downstream request has a command type of LOCAL and does not have the protocol block. This issue has been addressed in releases 1.29.1, 1.28.1, 1.27.3, and 1.26.7. Users are advised to upgrade. There are no known workarounds for this vulnerability.

Envoy is a cloud-native, open-source edge and service proxy. In versions 1.29.0 and 1.29.1, theEnvoy HTTP/2 protocol stack is vulnerable to the flood of CONTINUATION frames. Envoy's HTTP/2 codec does not reset a request when header map limits have been exceeded. This allows an attacker to send an sequence of CONTINUATION frames without the END_HEADERS bit set causing unlimited memory consumption. This can lead to denial of service through memory exhaustion. Users should upgrade to versions 1.29.2 to mitigate the effects of the CONTINUATION flood. Note that this vulnerability is a regression in Envoy version 1.29.0 and 1.29.1 only. As a workaround, downgrade to version 1.28.1 or earlier or disable HTTP/2 protocol for downstream connections.

Envoy is a cloud-native, open source edge and service proxy. The HTTP/2 protocol stack in Envoy versions prior to 1.29.3, 1.28.2, 1.27.4, and 1.26.8 are vulnerable to CPU exhaustion due to flood of CONTINUATION frames. Envoy's HTTP/2 codec allows the client to send an unlimited number of CONTINUATION frames even after exceeding Envoy's header map limits. This allows an attacker to send a sequence of CONTINUATION frames without the END_HEADERS bit set causing CPU utilization, consuming approximately 1 core per 300Mbit/s of traffic and culminating in denial of service through CPU exhaustion. Users should upgrade to version 1.29.3, 1.28.2, 1.27.4, or 1.26.8 to mitigate the effects of the CONTINUATION flood. As a workaround, disable HTTP/2 protocol for downstream connections.

Envoy is a cloud-native, open source edge and service proxy. When an upstream TLS cluster is used with `auto_sni` enabled, a request containing a `host`/`:authority` header longer than 255 characters triggers an abnormal termination of Envoy process. Envoy does not gracefully handle an error when setting SNI for outbound TLS connection. The error can occur when Envoy attempts to use the `host`/`:authority` header value longer than 255 characters as SNI for outbound TLS connection. SNI length is limited to 255 characters per the standard. Envoy always expects this operation to succeed and abnormally aborts the process when it fails. This vulnerability is fixed in 1.30.1, 1.29.4, 1.28.3, and 1.27.5.

Envoy is a cloud-native, open source edge and service proxy. A crash was observed in `EnvoyQuicServerStream::OnInitialHeadersComplete()` with following call stack. It is a use-after-free caused by QUICHE continuing push request headers after `StopReading()` being called on the stream. As after `StopReading()`, the HCM's `ActiveStream` might have already be destroyed and any up calls from QUICHE could potentially cause use after free.

Envoy is a cloud-native, open source edge and service proxy. There is a crash at `QuicheDataReader::PeekVarInt62Length()`. It is caused by integer underflow in the `QuicStreamSequencerBuffer::PeekRegion()` implementation.

Envoy is a cloud-native, open source edge and service proxy. Envoyproxy with a Brotli filter can get into an endless loop during decompression of Brotli data with extra input.

Envoy is a cloud-native, open source edge and service proxy. There is a use-after-free in `HttpConnectionManager` (HCM) with `EnvoyQuicServerStream` that can crash Envoy. An attacker can exploit this vulnerability by sending a request without `FIN`, then a `RESET_STREAM` frame, and then after receiving the response, closing the connection.

Envoy is a cloud-native, open source edge and service proxy. Due to how Envoy invoked the nlohmann JSON library, the library could throw an uncaught exception from downstream data if incomplete UTF-8 strings were serialized. The uncaught exception would cause Envoy to crash.

Envoy is a cloud-native, open source edge and service proxy. Envoy exposed an out-of-memory (OOM) vector from the mirror response, since async HTTP client will buffer the response with an unbounded buffer.

Envoy is a cloud-native, open source edge and service proxy. Prior to versions 1.30.4, 1.29.7, 1.28.5, and 1.27.7. Envoy references already freed memory when route hash policy is configured with cookie attributes. Note that this vulnerability has been fixed in the open as the effect would be immediately apparent if it was configured. Memory allocated for holding attribute values is freed after configuration was parsed. During request processing Envoy will attempt to copy content of de-allocated memory into request cookie header. This can lead to arbitrary content of Envoy's memory to be sent to the upstream service or abnormal process termination. This vulnerability is fixed in Envoy versions v1.30.4, v1.29.7, v1.28.5, and v1.27.7. As a workaround, do not use cookie attributes in route action hash policy.

Envoy is a cloud-native high-performance edge/middle/service proxy. A security vulnerability in Envoy allows external clients to manipulate Envoy headers, potentially leading to unauthorized access or other malicious actions within the mesh. This issue arises due to Envoy's default configuration of internal trust boundaries, which considers all RFC1918 private address ranges as internal. The default behavior for handling internal addresses in Envoy has been changed. Previously, RFC1918 IP addresses were automatically considered internal, even if the internal_address_config was empty. The default configuration of Envoy will continue to trust internal addresses while in this release and it will not trust them by default in next release. If you have tooling such as probes on your private network which need to be treated as trusted (e.g. changing arbitrary x-envoy headers) please explicitly include those addresses or CIDR ranges into `internal_address_config`. Successful exploitation could allow attackers to bypass security controls, access sensitive data, or disrupt services within the mesh, like Istio. This issue has been addressed in versions 1.31.2, 1.30.6, 1.29.9, and 1.28.7. Users are advised to upgrade. There are no known workarounds for this vulnerability.

Envoy is a cloud-native high-performance edge/middle/service proxy. Envoy's 1.31 is using `oghttp` as the default HTTP/2 codec, and there are potential bugs around stream management in the codec. To resolve this Envoy will switch off the `oghttp2` by default. The impact of this issue is that envoy will crash. This issue has been addressed in release version 1.31.2. All users are advised to upgrade. There are no known workarounds for this issue.

Envoy is a cloud-native high-performance edge/middle/service proxy. A vulnerability has been identified in Envoy that allows malicious attackers to inject unexpected content into access logs. This is achieved by exploiting the lack of validation for the `REQUESTED_SERVER_NAME` field for access loggers. This issue has been addressed in versions 1.31.2, 1.30.6, 1.29.9, and 1.28.7. Users are advised to upgrade. There are no known workarounds for this vulnerability.

Envoy is a cloud-native high-performance edge/middle/service proxy. Jwt filter will lead to an Envoy crash when clear route cache with remote JWKs. In the following case: 1. remote JWKs are used, which requires async header processing; 2. clear_route_cache is enabled on the provider; 3. header operations are enabled in JWT filter, e.g. header to claims feature; 4. the routing table is configured in a way that the JWT header operations modify requests to not match any route. When these conditions are met, a crash is triggered in the upstream code due to nullptr reference conversion from route(). The root cause is the ordering of continueDecoding and clearRouteCache. This issue has been addressed in versions 1.31.2, 1.30.6, and 1.29.9. Users are advised to upgrade. There are no known workarounds for this vulnerability.

Envoy is a cloud-native high-performance edge/middle/service proxy. Envoy will crash when the http async client is handling `sendLocalReply` under some circumstance, e.g., websocket upgrade, and requests mirroring. The http async client will crash during the `sendLocalReply()` in http async client, one reason is http async client is duplicating the status code, another one is the destroy of router is called at the destructor of the async stream, while the stream is deferred deleted at first. There will be problems that the stream decoder is destroyed but its reference is called in `router.onDestroy()`, causing segment fault. This will impact ext_authz if the `upgrade` and `connection` header are allowed, and request mirrorring. This issue has been addressed in versions 1.31.2, 1.30.6, 1.29.9, and 1.28.7. Users are advised to upgrade. There are no known workarounds for this vulnerability.

Envoy is a cloud-native high-performance edge/middle/service proxy. When additional address are not ip addresses, then the Happy Eyeballs sorting algorithm will crash in data plane. This issue has been addressed in releases 1.32.2, 1.31.4, and 1.30.8. Users are advised to upgrade. Users unable to upgrade may disable Happy Eyeballs and/or change the IP configuration.

Envoy is a cloud-native high-performance edge/middle/service proxy. In affected versions `sendOverloadError` is going to assume the active request exists when `envoy.load_shed_points.http1_server_abort_dispatch` is configured. If `active_request` is nullptr, only onMessageBeginImpl() is called. However, the `onMessageBeginImpl` will directly return ok status if the stream is already reset leading to the nullptr reference. The downstream reset can actually happen during the H/2 upstream reset. As a result envoy may crash. This issue has been addressed in releases 1.32.3, 1.31.5, 1.30.9, and 1.29.12. Users are advised to upgrade. Users unable to upgrade may disable `http1_server_abort_dispatch` load shed point and/or use a high threshold.

Envoy is a cloud-native high-performance edge/middle/service proxy. In affected versions envoy does not properly handle http 1.1 non-101 1xx responses. This can lead to downstream failures in networked devices. This issue has been addressed in versions 1.31.5 and 1.32.3. Users are advised to upgrade. There are no known workarounds for this issue.

Envoy Gateway is an open source project for managing Envoy Proxy as a standalone or Kubernetes-based application gateway. A user with access to the Kubernetes cluster can use a path traversal attack to execute Envoy Admin interface commands on proxies managed by any version of Envoy Gateway prior to 1.2.6. The admin interface can be used to terminate the Envoy process and extract the Envoy configuration (possibly containing confidential data). Version 1.2.6 fixes the issue. As a workaround, the `EnvoyProxy` API can be used to apply a bootstrap config patch that restricts access strictly to the prometheus stats endpoint. Find below an example of such a bootstrap patch.

Envoy Gateway is an open source project for managing Envoy Proxy as a standalone or Kubernetes-based application gateway. In all Envoy Gateway versions prior to 1.2.7 and 1.3.1 a default Envoy Proxy access log configuration is used. This format is vulnerable to log injection attacks. If the attacker uses a specially crafted user-agent which performs json injection, then he could add and overwrite fields to the access log. This vulnerability is fixed in 1.3.1 and 1.2.7. One can overwrite the old text based default format with JSON formatter by modifying the "EnvoyProxy.spec.telemetry.accessLog" setting.

Envoy is a cloud-native edge/middle/service proxy. Prior to versions 1.34.1, 1.33.3, 1.32.6, and 1.31.8, Envoy's URI template matcher incorrectly excludes the `*` character from a set of valid characters in the URI path. As a result URI path containing the `*` character will not match a URI template expressions. This can result in bypass of RBAC rules when configured using the `uri_template` permissions. This vulnerability is fixed in Envoy versions v1.34.1, v1.33.3, v1.32.6, v1.31.8. As a workaround, configure additional RBAC permissions using `url_path` with `safe_regex` expression.

Envoy is an open source L7 proxy and communication bus designed for large modern service oriented architectures. Versions 1.34.0 through 1.34.4 and 1.35.0 contain a use-after-free (UAF) vulnerability in the DNS cache, causing abnormal process termination. The vulnerability is in Envoy's Dynamic Forward Proxy implementation, occurring when a completion callback for a DNS resolution triggers new DNS resolutions or removes existing pending resolutions. This condition may occur when the following conditions are met: dynamic Forwarding Filter is enabled, the `envoy.reloadable_features.dfp_cluster_resolves_hosts` runtime flag is enabled, and the Host header is modified between the Dynamic Forwarding Filter and Router filters. This issue is resolved in versions 1.34.5 and 1.35.1. To work around this issue, set the envoy.reloadable_features.dfp_cluster_resolves_hosts runtime flag to false.

Envoy is an open source L7 proxy and communication bus designed for large modern service oriented architectures. In versions below 1.32.10 and 1.33.0 through 1.33.6, 1.34.0 through 1.34.4 and 1.35.0, insufficient Session Expiration in the Envoy OAuth2 filter leads to failed logout operations. When configured with __Secure- or __Host- prefixed cookie names, the filter fails to append the required Secure attribute to the Set-Cookie header during deletion. Modern browsers ignore this invalid request, causing the session cookie to persist. This allows a user to remain logged in after they believe they have logged out, creating a session hijacking risk on shared computers. The current implementation iterates through the configured cookie names to generate deletion headers but does not check for these prefixes. This failure to properly construct the deletion header means the user's session cookies are never removed by the browser, leaving the session active and allowing the next user of the same browser to gain unauthorized access to the original user's account and data. This is fixed in versions 1.32.10, 1.33.7, 1.34.5 and 1.35.1.

Envoy is a cloud-native, open source edge and service proxy. Prior to 1.36.1, 1.35.5, 1.34.9, and 1.33.10, large requests and responses can potentially trigger TCP connection pool crashes due to flow control management in Envoy. It will happen when the connection is closing but upstream data is still coming, resulting in a buffer watermark callback nullptr reference. The vulnerability impacts TCP proxy and HTTP 1 & 2 mixed use cases based on ALPN. This vulnerability is fixed in 1.36.1, 1.35.5, 1.34.9, and 1.33.10.

Envoy is an open source edge and service proxy. Envoy versions earlier than 1.36.2, 1.35.6, 1.34.10, and 1.33.12 contain a use-after-free vulnerability in the Lua filter. When a Lua script executing in the response phase rewrites a response body so that its size exceeds the configured per_connection_buffer_limit_bytes (default 1MB), Envoy generates a local reply whose headers override the original response headers, leaving dangling references and causing a crash. This results in denial of service. Updating to versions 1.36.2, 1.35.6, 1.34.10, or 1.33.12 fixes the issue. Increasing per_connection_buffer_limit_bytes (and for HTTP/2 the initial_stream_window_size) or increasing per_request_buffer_limit_bytes / request_body_buffer_limit can reduce the likelihood of triggering the condition but does not correct the underlying memory safety flaw.

Envoy is a high-performance edge/middle/service proxy. In 1.33.12, 1.34.10, 1.35.6, 1.36.2, and earlier, Envoy crashes when JWT authentication is configured with the remote JWKS fetching, allow_missing_or_failed is enabled, multiple JWT tokens are present in the request headers and the JWKS fetch fails. This is caused by a re-entry bug in the JwksFetcherImpl. When the first token's JWKS fetch fails, onJwksError() callback triggers processing of the second token, which calls fetch() again on the same fetcher object. The original callback's reset() then clears the second fetch's state (receiver_ and request_) which causes a crash when the async HTTP response arrives.

Envoy is a high-performance edge/middle/service proxy. In 1.33.12, 1.34.10, 1.35.6, 1.36.2, and earlier, when Envoy is configured in TCP proxy mode to handle CONNECT requests, it accepts client data before issuing a 2xx response and forwards that data to the upstream TCP connection. If a forwarding proxy upstream from Envoy then responds with a non-2xx status, this can cause a de-synchronized CONNECT tunnel state. By default Envoy continues to allow early CONNECT data to avoid disrupting existing deployments. The envoy.reloadable_features.reject_early_connect_data runtime flag can be set to reject CONNECT requests that send data before a 2xx response when intermediaries upstream from Envoy may reject establishment of a CONNECT tunnel.

Envoy is a high-performance edge/middle/service proxy. In 1.33.12, 1.34.10, 1.35.6, 1.36.2, and earlier, Envoy’s mTLS certificate matcher for match_typed_subject_alt_names may incorrectly treat certificates containing an embedded null byte (\0) inside an OTHERNAME SAN value as valid matches.

Envoy Gateway is an open source project for managing Envoy Proxy as a standalone or Kubernetes-based application gateway. Prior to 1.5.7 and 1.6.2, EnvoyExtensionPolicy Lua scripts executed by Envoy proxy can be used to leak the proxy's credentials. These credentials can then be used to communicate with the control plane and gain access to all secrets that are used by Envoy proxy, e.g. TLS private keys and credentials used for downstream and upstream communication. This vulnerability is fixed in 1.5.7 and 1.6.2.

Envoy is a high-performance edge/middle/service proxy. Prior to 1.37.1, 1.36.5, 1.35.8, and 1.34.13, the Envoy RBAC (Role-Based Access Control) filter contains a logic vulnerability in how it validates HTTP headers when multiple values are present for the same header name. Instead of validating each header value individually, Envoy concatenates all values into a single comma-separated string. This behavior allows attackers to bypass RBAC policies—specifically "Deny" rules—by sending duplicate headers, effectively obscuring the malicious value from exact-match mechanisms. This vulnerability is fixed in 1.37.1, 1.36.5, 1.35.8, and 1.34.13.

Envoy is a high-performance edge/middle/service proxy. Prior to 1.37.1, 1.36.5, 1.35.8, and 1.34.13, an off-by-one write in Envoy::JsonEscaper::escapeString() can corrupt std::string null-termination, causing undefined behavior and potentially leading to crashes or out-of-bounds reads when the resulting string is later treated as a C-string. This vulnerability is fixed in 1.37.1, 1.36.5, 1.35.8, and 1.34.13.

Envoy is a high-performance edge/middle/service proxy. Prior to 1.37.1, 1.36.5, 1.35.8, and 1.34.13, calling Utility::getAddressWithPort with a scoped IPv6 addresses causes a crash. This utility is called in the data plane from the original_src filter and the dns filter. This vulnerability is fixed in 1.37.1, 1.36.5, 1.35.8, and 1.34.13.

Envoy is a high-performance edge/middle/service proxy. Prior to 1.37.1, 1.36.5, 1.35.8, and 1.34.13, a logic vulnerability in Envoy's HTTP connection manager (FilterManager) that allows for Zombie Stream Filter Execution. This issue creates a "Use-After-Free" (UAF) or state-corruption window where filter callbacks are invoked on an HTTP stream that has already been logically reset and cleaned up. The vulnerability resides in source/common/http/filter_manager.cc within the FilterManager::decodeData method. The ActiveStream object remains valid in memory during the deferred deletion window. If a DATA frame arrives on this stream immediately after the reset (e.g., in the same packet processing cycle), the HTTP/2 codec invokes ActiveStream::decodeData, which cascades to FilterManager::decodeData. FilterManager::decodeData fails to check the saw_downstream_reset_ flag. It iterates over the decoder_filters_ list and invokes decodeData() on filters that have already received onDestroy(). This vulnerability is fixed in 1.37.1, 1.36.5, 1.35.8, and 1.34.13.

Envoy is a high-performance edge/middle/service proxy. Prior to 1.37.1, 1.36.5, 1.35.8, and 1.34.13, At the rate limit filter, if the response phase limit with apply_on_stream_done in the rate limit configuration is enabled and the response phase limit request fails directly, it may crash Envoy. When both the request phase limit and response phase limit are enabled, the safe gRPC client instance will be re-used for both the request phase request and response phase request. But after the request phase request is done, the inner state of the request phase limit request in gRPC client is not cleaned up. When a second limit request is sent at response phase, and the second limit request fails directly, the previous request's inner state may be accessed and result in crash. This vulnerability is fixed in 1.37.1, 1.36.5, 1.35.8, and 1.34.13.